Listening to Primephonic with your car radio can be done with Bluetooth or by cable. If you would prefer to connect to your car radio through another system, please share your feedback here.
If you would like to connect via Bluetooth, please follow these instructions:
Step 1 - You will first need to make sure that the device that you are using to stream on Primephonic is Bluetooth enabled. This can be checked in the settings of your device.
Step 2 - It is also very important to check that your car radio is able to receive a Bluetooth signal and then enabled. You can find out how to do this by checking the instructions for your car radio. These are generally provided by the manufacturer.
Step 3 - Once you have verified that your sound system is enabled for Bluetooth connection and that your device has Bluetooth turned on, you can pair your device. You can do so by going to Settings - Device Connection - Bluetooth - enable Bluetooth with the ""on/off"" switch - and then selecting your device for pairing.
Step 4 - Once you see the confirmation that your device and sound system are connected, you can go on to Primephonic and press play on your selected work.
If you would like to connect via cable, please follow these instructions:
If your preference is to use cabled speakers, or if your sound system does not enable a connection with any other means than with a cable, you can always use a an AUX "jack" cable to connect your computer, phone or tablet to your car radio.
Step 1 - You will need to make sure that your car radio has a "line in/AUX" entry and make sure that you have the suitable cable connection from your phone, tablet or computer to your car radio.
This can be checked by checking the manufacturing guide of your sound system and the device you will use to stream with Primephonic.
Step 2 - Once you see the confirmation that your device and sound system are connected, you can go on to Primephonic and press play on your selected work.